Descriptor type = cable, Frequency option, Modulation type option – TANDBERG E5714 User Manual
Page 154: Fec (outer) option, Fec (inner) option, 6 descriptor type = cable
Operating the Equipment Locally
Page 4-76
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
Table 4.81: Other Frequency Options
Selected Option
Description
None
No other frequency is in use.
in use
One or more other frequencies are in use.
4.11.6 Descriptor Type = Cable
Frequency Option
See Frequency Option on page 4-73.
Modulation Type Option
To access the Modulation Type option, press the Modulation Type softkey
in the Delivery Descriptor Menu. This screen enables the type of
modulation used by the cable channel to be specified.
Table 4.82: Modulation Type Options
Selected Option
Description
16-QAM
Cable channel uses 16QAM modulation.
32-QAM
Cable channel uses 32QAM modulation.
64-QAM
Cable channel uses 64QAM modulation.
128-QAM
Cable channel uses 128QAM modulation.
256-QAM
Cable channel uses 256QAM modulation.
FEC (Outer) Option
To access the FEC (Outer) option, press the FEC (Outer) softkey in the
Delivery Descriptor
Menu. This screen enables the outer FEC rate used
by the cable channel to be specified.
Table 4.83: FEC (Outer) Options
Selected Option
Description
No outer FEC coding
Cable channel does not use outer FEC.
RS(204/188)
FEC (Inner) Option
To access the FEC (Inner) option, press the FEC (Inner) softkey in the
Delivery Descriptor
Menu. This screen enables the inner FEC rate used
by the cable channel to be specified.