TANDBERG E5714 User Manual
Page 243
Technical Specification
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
Page B-7
ST.TM.E10076.3
NOTES…
1. Refer to Annex G, Audio Modes when using these coding standards.
2. Problems may be experienced with some Receivers if the Encoder and Decoder are not using the
same version of SMPTE 302M specification, e.g. either 1998 or 2000. The Encoder can be set up
to work in either standard.
3. The digital audio input does not support SPDIF.
CAUTION…
When the unit is not powered the audio input defaults to digital with 110
W termination.
Table B.9: MUSICAM Analogue Test Specification
Item
Specification
Set-up of Alteia Receiver
Audio Format
MPEG
Output
Analogue
Clip Level
18 dB
Set-up of Audio Encoder
Input
Analogue
Clip Level
18 dB
Sampling Frequency
48 kHz
Coding Standard
MUSICAM, MPEG 1 (Layer 2)
Coding Mode
Stereo
Bit-rate
384 k bit/s
Set-up of Lindos Audio Oscillator
Sequence
TPBDLKZ
Test
Tolerance for Left and Right Legs for Channel (A) and Channel (B)
Test Level
T
1 kHz @ 0 dB
± 0.2 dB
Sweep 20 Hz - 20 kHz @ -20 dB
P
20 Hz – 63 Hz
+0.0 to - 0.5 dB
100 Hz – 10 kHz
+0.2 to - 0.3 dB
12.5 Hz – 18 kHz
+0.2 to - 0.5 dB
20 kHz
0 to -1.5 dB
Crosstalk @ 0 dBs
B
100 Hz
76 dB
1 kHz
78 dB
6.3 kHz
68 dB
10 kHz
63 dB
Distortion + noise @ +8 dB
D
100 Hz
68 dB
1 kHz
70 dB