Data xa - rs232 menu (when m2/eom2/dat fitted), Overview, Hardware release option – TANDBERG E5714 User Manual
Page 148: Software release option, Data xb – rs422 menu \(m2/eom2/dat fitted\), Output menu, 11 output menu, 1 overview
Operating the Equipment Locally
Page 4-70
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
4.10.4 Data XA - RS232 Menu (When M2/EOM2/DAT Fitted)
Overview
NOTE…
In the Data XA - RS232 Menu, X = the number of the option slot that the module fits into.
See Section 4.10.2, Data A - RS232 Menu, for the following options:
·
Encoding
·
Baud-rate
·
RS232 PID
Hardware Release Option
This option indicates the hardware release of the data card. It is for status
only and cannot be changed.
Software Release Option
This option indicates the software release of the data card. It is for status
only and cannot be changed.
4.10.5 Data XB – RS422 Menu (M2/EOM2/DAT Fitted)
Overview
NOTE…
In the Data XB – RS422 Menu, X = the number of the option slot that the module fits into.
See Section 4.10.3, Data B - RS422 Menu, for the following options:
·
Encoding
·
Bit-rate
·
RS422 PID
Hardware Release Option
This option indicates the hardware release of the data card. It is for status
only and cannot be changed.
Software Release Option
This option indicates the software release of the data card. It is for status
only and cannot be changed.
4.11
Output Menu
4.11.1 Overview
The Output Menu is selected from the Setup Menu by pressing the Output
softkey. This menu permits the selection of the output parameters. See
Figure 4.17 for the menu structure.