Ird menu (3.1 and later), Overview, Ird mode option – TANDBERG E5714 User Manual
Page 183: Ird ts source option, 14 ird menu (3.1 and later), 1 overview, 2 ird mode option, 3 ird ts source option
Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
Page 4-105
ST.TM.E10076.3
4.14
IRD Menu (3.1 and later)
4.14.1 Overview
NOTE…
This option is available in Build version 3.1.0 and later.
The IRD Menu is selected from the Setup Menu by pressing the IRD
softkey.
The menu controls the internal receiver decoder (IRD), if it is fitted. The
IRD consists of the SD Decoder option M2/EOM2/DEC and either of the
following demodulator options, M2/EOM2/QPSKDEMOD or
M2/EOM2/SATDEMOD.
4.14.2 IRD Mode Option
To access the IRD Mode option, press the IRD Mode softkey in the
IRD
Menu
.
Table 4.132: IRD Mode Options
Selected Option
Description
Independent
The IRD operates completely independently from the Encoder.
Tracking
The IRD tracks, as far as is possible, the modulator settings, minimising the amount of
set-up required to monitor the local modulator output.
4.14.3 IRD TS Source Option
To access the IRD TS Source option, press the IRD TS Source softkey in
the
IRD Menu
.
Table 4.133: IRD TS Source Options
Selected Option
Description
IRD Demod
The IRD will decode the transport stream from the demodulator.
Internal TS
The IRD will decode the host Encoder’s internal transport stream.