M2/eom2/xlr, xlr expander card option – TANDBERG E5714 User Manual
Page 259
Technical Specification
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
Page B-23
ST.TM.E10076.3
B.10.4 M2/EOM2/XLR, XLR Expander Card Option
NOTE…
The M2/EOM2/XLR, XLR Expander Card Option is supported by Encoder software version 3.0 and
later.
Table B.36: Analogue and Digital Audio (XLR Expander Card)
Item
Specification
Inputs
Safety status
SELV
Connector designation (inputs)
AUDIO IN L AES/EBU, AUDIO IN R
Connector type
Three- way XLR female
Input standard (analogue)
Balance analogue
Clip Level
15 dB or 18 dB
Sampling rate
48 kHz
Input impedance
600
W or 20 kW
Input standard (digital)
AES/EBU Digital
Termination
110
W
Sampling Rate
Not applicable
Input rate
32, 44.1, 48 kHz (when using MPEG1 Level 2 or AC-3), see audio section for
further details.
Outputs
Safety status
SELV
Connector designation (outputs)
AUDIO OUT L AES/EBU, AUDIO OUT R
Connector type
Three- way XLR male
Output standard (analogue)
Balance analogue
Clip Level
15 dB or 18 dB FSR
Sampling rate
Same as digital source rate
Output impedance
10
W (typically)
Output standard (digital)
AES/EBU Digital
Output impedance
110
W
Output rate
Same as digital source
When the unit is not powered the XLR IN L AES/EBU audio input defaults to AES/EBU with 110
W termination