Nortel Networks 9150 User Manual

Page 90

Remote Gateway 9150 Installation and Administration Guide

Planning for Remote Gateway 9150 unit installation

Standard 3.1

Note: When the administration PC is connected to the Remote Gateway 9150
unit through the serial port, you can view the command line interface using an
application such as Telnet or HyperTerminal. However, the command line
interface is not documented in this guide. Configuration Manager is the
supported tool for administering the Remote Gateway 9150 unit over the serial
port.

Ethernet connection
Once you configure the Remote Gateway 9150 unit with its IP interface
information, the following can happen:

Communication can be established between the Remote Gateway 9150 unit
and the RLC (that is, calls can be routed over the IP network).

You can administer and upgrade the Remote Gateway 9150 unit over the IP
network.
This means you do not have to install an administration PC in the same
location as the Remote Gateway 9150 unit. Refer to the following
illustration:

G101415

Remote Gateway 9150

Network

Ethernet
network

Router

Administration
PC

10.4.1.1

10.1.1.10

10.1.1.2

10.1.1.3

V.35

STA

TUS

MODU

COLL

ETHERN

POW