Nortel Networks 9150 - Manual (Page 267)

Remote Gateway 9150 Installation and Administration Guide 237
January 2005 Configuring the Remote Gateway 9150 unit
Trunk Group Configuration field descriptions
Field Description
Group No Select a group number.
Valid options are 1 through 8.
The default is 1.
Status
!
Click on the Enable option button to activate the trunk
group.
!
Click on the Disable option button to deactivate the trunk
group.
The default is Disable.
Trunk Access Code Enter the trunk access code that you want to assign to the
trunk group, or accept the default.
Note: The trunk access code is automatically prefixed with a
pound sign (#). This means users must dial the # before the
trunk access code when making an outgoing local call.
Maximum length: 1 to 3 digits in addition to the pound sign
The default is 61.
Local DNs to Alert: Not
Configured Ensure that the Not Configured check box is cleared if you
wish to have incoming calls ring only on specific stations.
Enter the applicable extensions in the fields below the check
box. You can enter up to five extensions.
Note: You can create a private line by dedicating a trunk
group to one station only.
If you leave the fields blank, incoming calls received by this
trunk group rings on all telephones.