Nortel Networks 9150 - Manual (Page 211)

Remote Gateway 9150 Installation and Administration Guide 181
January 2005 Configuring the Remote Gateway 9150 unit
Enable PBX Alarms Click on the Enable PBX Alarms checkbox if you want
the Remote Gateway 9150 unit to notify the host PBX to
produce alarms and alerts. If you don't want the Remote
Gateway 9150 unit to notify the host PBX to produce
alarms and alerts, ensure that the Enable PBX Alarms
checkbox is not selected.
Refer to “Display logs” on page 412 to determine which
alarms and alerts the PBX generates.
SPRE Codes: Online Enter the SPRE code that is to be used to put your site into
online mode, or accept the default code. The default code
is #99.
Note: The SPRE code is automatically prefixed with the
pound sign (#). This means users must dial # before the
SPRE code when going into online mode.
Maximum length: 3 digits in addition to the pound sign
Refer to “Online/offline table” on page 40 for more
information.
SPRE Codes: Paging Enter the SPRE code that is used to announce pages to
other stations in your office, or accept the default code.
The default is #05.
Note: The SPRE code is automatically prefixed with a
pound sign (#). This means users must dial # before the
SPRE code when initiating a page.
Maximum length: 3 digits in addition to the pound sign
Field Description