Nortel Networks 9150 - Manual (Page 258)

228 Remote Gateway 9150 Installation and Administration Guide
Configuring the Remote Gateway 9150 unit Standard 3.1
BRI Configuration field descriptions
Field Description
Module # Select the number identifying the trunk interface module
that you are configuring.
Note: The number you select must match the module
position where the module has been installed.
Valid options are 4 through 7.
The default is four.
TEI Dropped When the layer 2 drops, the TEI also drops and must be re-
acquired.
!
Click on the Enable option button if you want the TEI
to drop when the layer 2 drops.
!
Click on the Disable option button if you do not want
the TEI to drop when the layer 2 drops.
The default is Disable.
Note: This is a CO implementation dependent
configuration.