Nortel Networks 9150 - Manual (Page 414)

384 Remote Gateway 9150 Installation and Administration Guide
Planning forms Standard 3.1
Remote Gateway 9150
Configuration Information—Dialing Plans
Page 1 of 1
Notes:
! Nortel recommends that you use the pre-configured default codes listed below.
! The pound sign (# in North America) is mandatory and is automatically pre-configured in
Configuration Manager. The pound sign prevents conflicts with the dialing plan on the host
PBX.
! You can dedicate all B-channels to one trunk group. You do not have to create a trunk group
for each B-channel.
Description Default code Your code (maximum of 3 digits)
Online SPRE code #99 #
Offline SPRE code #98 #
Paging SPRE code #05 #
Local Calling SPRE code
(for analog or ATA-equipped stations) #8
#
Registration SPRE code
(for multi-user or dynamic pool ports only) #97
#
De-registration SPRE code
(for multi-user or dynamic pool ports only) #96
#
Access code for trunk group 1 #61 #
Access code for trunk group 2 #62 #
Access code for trunk group 3 #63 #
Access code for trunk group 4 #64 #
Access code for trunk group 5 #65 #
Access code for trunk group 6 #66 #
Access code for trunk group 7 #67 #
Access code for trunk group 8 #68 #