Nortel Networks 9150 - Manual (Page 233)

Remote Gateway 9150 Installation and Administration Guide 203
January 2005 Configuring the Remote Gateway 9150 unit
RLC Connection Configuration field descriptions
Field Description
Unit ID The RLC’s non-configurable Unit ID is 254.
IP Connection
!
Click on the Enable option button if you want to route
calls over your IP network.
!
Click on the Disable option button if you do not want
to route calls over your IP network.
The default is Disable.
PSTN Connection Click on the Enable option button if you want to route
calls over the PSTN.
Click on the Disable option button if you do not want to
route calls over the PSTN.
The default is Disable.
IP Address Enter the RLC’s IP address.
The Remote Gateway 9150 unit uses this IP address to
connect to the RLC over the IP network.
Note: If you disable the IP connection, these fields are
dimmed.
PSTN Number to Connect
to RLC If you enabled the PSTN connection, enter the telephone
number used to connect to the RLC.
If you want, you can also include the following characters
in the telephone number:
!
a period (.) for a caller ID separator
!
a comma (,) for a delay of 1/2 second
!
a dash (-) for a null separator
Note: Enter the PSTN number to connect to RLC exactly
as it must be dialed by the Remote Gateway 9150 unit,
including 1 for long distance and 9 for Centrex trunk
access.