Nortel Networks 9150 - Manual (Page 234)

204 Remote Gateway 9150 Installation and Administration Guide
Configuring the Remote Gateway 9150 unit Standard 3.1
IP Signaling
!
Click on the Permanent option button if you want the
signaling link to the Remote Unit to never close.
Note: This is useful in times when the Remote unit is
behind a NAT router.
!
Click on the On Demand option button if you want the
signaling link to close once there are no active calls
between the RLC and the Remote unit.
The default is On Demand.
Note: If you disable the IP connection, these option
buttons are dimmed.
Refer to “Deployment options” on page 75 for more
information.
Block Incoming Local Call
on Primary B Channel
!
Click on the Enable option button if the primary B-
channel (trunk) should not receive incoming local calls.
!
Click on the Disable option button if the primary B-
channel (trunk) should receive incoming local calls.
The default is Enable.
Field Description