Nortel Networks 9150 - Manual (Page 183)

Remote Gateway 9150 Installation and Administration Guide 153
January 2005 Using Configuration Manager
Working with configuration files
This section explains how to:
!
create a configuration file (refer to page 154)
!
open a configuration file in Configuration Manager (refer to page 154)
!
perform a configuration upload (refer to page 155)
!
perform a configuration download (refer to page 155)
When to use the Configuration Manager file operations
You can use When you are
OK, File → Open, and
File → Save As
working in offline mode
or
connected and logged on to a unit.
Note: When working in offline mode, you must save
the configuration to a file. However, when you are
logged on to a unit, the file save operation is optional.
To save the configuration to Flash, first update the
unit’s local buffer by clicking on the Send button or
choosing Upload/Download
→ Send All from the
Menu Bar. Then, use Upload/Download → Save to
Flash to complete the operation.
one of the following:
!
Send
!
Send All
!
Retrieve
!
Upload
Configuration
!
Download
Configuration
connected and logged on to a unit.