Nortel Networks 9150 - Manual (Page 332)

302 Remote Gateway 9150 Installation and Administration Guide
Administration Standard 3.1
Caller Info Statistics field descriptions
The following table describes the statistics on the Caller Info Statistics screen:
Column Description
Connection ID Identifies the sequential number of the call processed
by the remote unit in relation to all calls ever
processed by that unit.
Remote ID Identifies the Unit ID of the remote site that was
involved in the call. Local calls on a Remote Gateway
9150 unit result in a 0 in this field.
Current Media Identifies whether the call took place over the PSTN or
IP network.
Type Identifies the type of call.
Valid values are Signaling, Voice, and Local.
Priority Identifies the priority setting of the involved trunk.
Valid values are PSTN Only, IP Only, High, and
Normal.
Call BW Identifies the amount of bandwidth used by the call.
Start Time Identifies the time that the connection initiated.
Transitions to PSTN Identifies the number of times the RLC moved the call
to the PSTN.
Transitions to IP Identifies the number of times the RLC moved the call
to the IP network.
Last Transition to
PSTN Identifies the last time the RLC moved the call from the
IP network to the PSTN.
Last Transition to IP Identifies the last time the RLC moved the call from the
PSTN to the IP network.