Nortel Networks 9150 - Manual (Page 157)

Remote Gateway 9150 Installation and Administration Guide 127
January 2005 Installing the Remote Gateway 9150 unit
12 Do one of the following:
IF you are performing an THEN
offline configuration, 1 Click on the Save to File button.
Result: Configuration Manager
prompts you to specify the directory
path and file name for the
configuration file.
2 Specify the directory path and file
name for this configuration.
Note: The file name automatically
defaults with the name you entered as
the node name.
3 Ensure the Files of type field shows
Text File(*.TXT).
4 Click on the Save button to complete
the Save to File.
Result: The file is saved, then you are
asked if you want to configure another
board. If you do, click on the Yes
button, and continue with step 3 on
page 120.
5 You can open the information in this
file in Configuration Manager, then
send and save the file in the RLC’s
Flash memory at another time. For
instructions, refer to “Working with
configuration files” on page 153.