Nortel Networks 9150 - Manual (Page 78)

48 Remote Gateway 9150 Installation and Administration Guide
Planning for Remote Gateway 9150 unit installation Standard 3.1
Remote Gateway 9150 Installation Checklist
Page 3 of 4
✓
Task For details, refer to
❒ Install the software from the product
CD-ROM or the Nortel web site. “Installing the Configuration
Manager software” on page
113.
❒ Configure the IP address, subnet mask,
and default gateway on the Remote
Gateway 9150 unit. “Using the Configuration
Wizard to perform initial
configuration” on page 115.
❒ Configure the following items, as
required, to create the communication
paths between the Remote Gateway
9150 unit and the RLC:
!
IP network: RLC’s IP address
!
PSTN:
— RLC’s telephone number
— primary trunk
!
security level and, if required,
security identifier
!
“Using the Configuration
Wizard to perform initial
configuration” on page
115
!
“Security level
configuration” on page
200
❒ PING the Remote Gateway 9150 unit
and ensure that it is recognized as a
device on the network. “Testing the network
connections” on page 129.
❒ Ensure that the Remote Gateway 9150
unit’s connection information is
completed on the RLC. the Reach Line Card
Installation and
Administration Guide
(NTP 555-8421-210).
❒ Configure user stations with
appropriate calling permissions and
features. “9150 port configuration” on
page 207.