Nortel Networks 9150 - Manual (Page 165)

Remote Gateway 9150 Installation and Administration Guide 135
January 2005 Using Configuration Manager
Starting and viewing Configuration Manager
The Configuration Manager software application is best viewed when your
monitor settings are configured as 1024 by 768 pixels using Small Fonts at 96
dpi. If you use larger fonts, some fields and buttons might be hidden. You must
use the horizontal and vertical scroll bars to view the hidden fields or buttons.
For instructions on changing your display settings, refer to the Windows online
help on your PC.
To start and log on to a Configuration Manager session:
1 From the Menu Bar, choose Start
→
Programs
→
Remote Gateway 9100
Series
→
Configuration Manager.
Result: The Configuration Manager opens prompts you for the logon name
and password.
2 Enter admin in the Login Name field.
3 Enter root in the Password field.
Note: This is the default password. You can change the password after
installation, though Nortel recommends that you do not change the
password until your Remote Gateway 9100 Series system is up and
running.
4 Click on the OK button.
Result: The system informs you of a successful logon. In the event of an
unsuccessful logon, the system informs you of the need to re-enter the
information.