Siemens SINUMERIK 840C - Manual (Page 207)

6 NC Machine Data (NC MD), NC Setting Data (NC SD) 09.95
6.2 General machine data (general data)
Language switchover 1) 250
Default value Lower input limit Upper input limit Units
0 0 1 –
Active on
Power On
SINUMERIK 840C can display two languages at option.
The following entries are possible:
0 = Language 1
1 = Language 2
The following language combinations are available:
Language 1 Language 2
German English
German French
German Italian
German Spanish
English French
English Italian
English Spanish
You can check which combination has been ordered and implemented via the ”Control info”
softkey.
M function ”C axis on” 260
Default value Lower input limit Upper input limit Units
- 1 - 1 9 999 - 1
Active on
NC Stop
M function ”C axis off” 261
Default value Lower input limit Upper input limit Units
- 1 - 1 9 999 -
Active on
NC Stop
Active: when all channels of the mode group are in STOP status.
C axis operation is selected and deselected via M functions. The numbers of these M
functions can be allocated on a customer-specific basis.
_______
1) Up to SW 1
6–22 © Siemens AG 1992 All Rights Reserved 6FC5197- AA50
SINUMERIK 840C (IA)