2 adding a 1-axis fdd module (as from sw 3) – Siemens SINUMERIK 840C User Manual

Page 172

09.95



Siemens AG 2001

6FC5197–

AA50

5–44

SINUMERIK 840C (IA)

5.9.2

Adding a 1-axis FDD module (as from SW 3)

Specifications

Module slots:

Slot 1:

MSD module

(Installation location) Slot 2:

free

Slot 3:

free

Slot 4:

2 axis FDD module

Slot 6:

1 axis FDD module

Entering the

Enter the additional 1 axis FDD module for slot 2 (installation location) in the

drive configuration

drive configuration display. Select the actual module type with Select module
softkey. Confirm these settings with the Accept Conf + NCKP0 softkey.

Fig. 5.18

Motor selection

Select the actual motor type with the Enter motor softkey. Confirm this setting
with the Accept all + NCKP0 softkey.

Notes

Please make sure that you enter NC MD 3840 and 2000 correctly (assign).

The drive numbers of drives already installed must not be changed, i.e. a new
drive must be given a new drive number.

5 Machine Data Dialog (MDD – as from SW 3)

5.9.2 Adding a 1-axis FDD module (as from SW 3)

This manual is related to the following products:

SIMODRIVE 611-D