Intel 253666-024US - Manual (Page 563)

Vol. 2A 3-517
INSTRUCTION SET REFERENCE, A-M
JMP—Jump
If target offset in destination operand is non-canonical.
If target offset in destination operand is beyond the new code
segment limit.
If the segment selector in the destination operand is NULL.
If the code segment selector in the 64-bit gate is NULL.
#GP(selector) If the code segment or 64-bit call gate is outside descriptor table
limits.
If the code segment or 64-bit call gate overlaps non-canonical
space.
If the segment descriptor from a 64-bit call gate is in non-
canonical space.
If the segment descriptor pointed to by the segment selector in
the destination operand is not for a conforming-code segment,
nonconforming-code segment, 64-bit call gate.
If the segment descriptor pointed to by the segment selector in
the destination operand is a code segment, and has both the
D-bit and the L-bit set.
If the DPL for a nonconforming-code segment is not equal to the
CPL, or the RPL for the segment’s segment selector is greater
than the CPL.
If the DPL for a conforming-code segment is greater than the
CPL.
If the DPL from a 64-bit call-gate is less than the CPL or than the
RPL of the 64-bit call-gate.
If the upper type field of a 64-bit call gate is not 0x0.
If the segment selector from a 64-bit call gate is beyond the
descriptor table limits.
If the code segment descriptor pointed to by the selector in the
64-bit gate doesn't have the L-bit set and the D-bit clear.
If the segment descriptor for a segment selector from the 64-bit
call gate does not indicate it is a code segment.
If the code segment is non-confirming and CPL ≠ DPL.
If the code segment is confirming and CPL < DPL.
#NP(selector) If a code segment or 64-bit call gate is not present.
#UD (64-bit mode only) If a far jump is direct to an absolute address
in memory.
If the LOCK prefix is used.
#PF(fault-code) If a page fault occurs.
#AC(0) If alignment checking is enabled and an unaligned memory
reference is made while the current privilege level is 3.