Intel 253666-024US User Manual
Page 424
3-378 Vol. 2A
FSCALE—Scale
INSTRUCTION SET REFERENCE, A-M
before the FXTRACT operation was performed. The FSTP ST(1) instruction overwrites
the exponent (extracted by the FXTRACT instruction) with the recreated value, which
returns the stack to its original state with only one register [ST(0)] occupied.
This instruction’s operation is the same in non-64-bit modes and 64-bit mode.
Operation
ST(0) ← ST(0) ∗ 2
RoundTowardZero(ST(1))
;
FPU Flags Affected
C1
Set to 0 if stack underflow occurred.
Set if result was rounded up; cleared otherwise.
C0, C2, C3
Undefined.
Floating-Point Exceptions
#IS
Stack underflow occurred.
#IA
Source operand is an SNaN value or unsupported format.
#D
Source operand is a denormal value.
#U
Result is too small for destination format.
#O
Result is too large for destination format.
#P
Value cannot be represented exactly in destination format.
Protected Mode Exceptions
#NM
CR0.EM[bit 2] or CR0.TS[bit 3] = 1.
#MF
If there is a pending x87 FPU exception.
#UD
If the LOCK prefix is used.
Real-Address Mode Exceptions
Same exceptions as in protected mode.
Virtual-8086 Mode Exceptions
Same exceptions as in protected mode.
Compatibility Mode Exceptions
Same exceptions as in protected mode.
64-Bit Mode Exceptions
Same exceptions as in protected mode.