Yaskawa Sigma II Indexer - Manual (Page 16)

Sigma II Indexer User’s Manual Checking Products on Delivery
1-3
1.2 Checking Products on Delivery
The following procedure is used to check products upon delivery. Check the following
items when products are delivered.
If any of the above items are faulty or incorrect, contact your Yaskawa sales representative
or the dealer from whom you purchased the products.
1.2.1 External Appearance And Nameplate Examples
Figure 1.2 External Appearance of Sigma II Indexer Application Module
Figure 1.3 Nameplate
Table 1.2:
Check items Comments
Are the delivered products the ones
that were ordered? Check the model numbers marked on the nameplates of the application
module.
Is there any damage?
Check the overall appearance, and check for damage or scratches that may
have occurred during shipping.
Can the application module be
installed on the SGDH servo amplifier
used? Check the model number given on the SGDH servo amplifier nameplate. The
model number must contain “SGDH-
FFF E” to support the Sigma II
Indexer application module.