beautypg.com

5 saving operating data on a memory card, 1 information on saving data on a memory card, 2 inserting the memory card – SMA SC 500CP XT User Manual

Page 60: 3 enabling data storage on the memory card, Saving operating data on a memory card, Information on saving data on a memory card, Inserting the memory card, Enabling data storage on the memory card

background image

16. Choose the save location.

17. Select the button [Save].

6.3.5

Saving Operating Data on a Memory Card

6.3.5.1

Information on Saving Data on a Memory Card

You can save all the data collected from the inverter to a memory card. The save-to-memory-card feature is disabled by
default. If a memory card is inserted into the slot of the communication unit and data storage on external storage
media is enabled, the communication unit will copy all data from the internal ring buffer to the external SD memory
card. The communication unit continues to store data on the memory card for as long as the memory card is inserted in
the slot. The communication unit creates a folder on the memory card. The name of the folder is "SC-
COM_[SerialNumber]". [SerialNumber] designates the serial number of the respective communication unit. In this
folder, the communication unit creates a new subfolder for each day. Each subfolder contains all the data collected by
the communication unit. When the memory card has reached its capacity, the LED H5 glows red and the
communication unit ceases to store data on the memory card. Replace the memory card or reformat it on the
computer.

Data loss if memory card is removed

Do not remove the memory card while the communication unit is in process of storing data. This can damage the
file system of the memory card and lead to data loss. Depending on the amount of data, the write process can
take some time.

6.3.5.2

Inserting the Memory Card

Danger to life due to electric shock or electric arc if live components are touched

• Switch off the inverter and wait at least 15 minutes before opening it to allow the capacitors to discharge

completely.

Disconnect the inverter (see Section 5, page 51).

Procedure:

• Insert the memory card in the slot of the communication unit.

6.3.5.3

Enabling Data Storage on the Memory Card

1. Log into the user interface (see Section 9.4.1, page 81).

2. Select Sunny Central > Settings > Security.

6 Operation

SMA Solar Technology AG

User Manual

SCCPXT-BA-E4-en-54

60