SMA SC 500CP XT - Manual (Page 143)

Name Description Value/range Explanation Default
value
DevFunc* Manages the Sunny String-Moni-
tors AutoDetect_
SSMU Searches for all Sunny String-
Monitors and deletes previ-
ously detected Sunny String-
Monitors 0
DetectSSMU
Retry Searches for undetected Sun-
ny String-Monitors only
DelAll_SSMU Deletes all detected Sun-
ny String-Monitors
Factory Resets all parameters to default
settings.
* To change these parameters, you must enter the installer password.
11.2.3 Sunny String-Monitor
Name Description Value/range Explanation Default
value
TMittelung* Duration of averaging of current
measurements 0 s to 6,000 s ‒ 30 s
String Anzahl* Number of detected strings 0 to 8 ‒ 0
SW Version Current firmware version 1 to 40 Value cannot be changed
SSM Identifier* Identification number of Sunny
String-Monitor
1 to 99 ‒ 0
Group String 1
* Assigns strings to their respective
group 0 to 3 Parameter exists for all eight
groups 0
Group String* All groups 0 to 3 ‒ 0
No.of String 1* Number of connected strings in
the respective group
1 to 4 Parameter exists for all eight
groups
If you wish to use this function,
contact us (see Section 13,
page 154).
‒
No.of Strings* All groups 1 to 4 ‒ ‒
Monitoring1
On* Start of monitoring of strings in
group 1 0:00 a.m. to
11:59 p.m. Parameter exists for all eight
groups
Configure the string settings
preferably via the Sunny Cen-
tral String-Monitor Controller.
0
Monitoring1
Off* End of monitoring of strings in
group 1 0:00 a.m. to
11:59 p.m. Parameter exists for all eight
groups
Configure the string settings
preferably via the Sunny Cen-
tral String-Monitor Controller.
0
11 Operating Data and Parameters SMA Solar Technology AG
User Manual 143 SCCPXT-BA-E4-en-54