SMA SC 500CP XT - Manual (Page 151)

Elements of the XML file Explanation
my config V1.01
Required element of the XML file. You must enter
the name and the version for your settings between
the version tags. This information is displayed in the
header of the user interface.
NetworkSettings_DhcpUsage1
False
Here, you can set the parameters and their corre-
sponding values (see Section 12.3.2, page 151).
2500
Here, you can set the time period in ms which must
expire before the communication unit will shut
down after the UPS of the inverter has signaled a
failure of the supply voltage to the communication
unit. The value must be greater than or equal to
2,500. This setting is immediately adopted once
the file is uploaded.
Example: XML file for setting the Czech language on the user interface
my config V1.01
NativeSettings_Language
cs
12.3.2 Parameters and Values for the File custom.xml
Parameter Explanation Values Default val-
ues
NetworkSettings_DhcpUsage1 Activates DHCP for LAN2. With the
True value, all other settings of the IP
addresses for LAN2 will be ignored. True False
False
NetworkSettings_DnsIpAddr1 Sets the first IPv4 address of the DNS
server for LAN2 ‒ ‒
0.0.0.0
A valid IPv4
address
12 Appendix SMA Solar Technology AG
User Manual 151 SCCPXT-BA-E4-en-54