HEIDENHAIN TNC 640 (34059x-05) Cycle programming - Manual (Page 596)

Touch Probe Cycles: Automatic Kinematics Measurement
18.4 MEASURE KINEMATICS (Cycle 451, DIN/ISO: G451, option)
18
596
TNC 640 | User's Manual Cycle Programming | 1/2015
Reference angle Q380 (absolute): Reference
angle (basic rotation) for measuring the measuring
points in the active workpiece coordinate system.
Defining a reference angle can considerably enlarge
the measuring range of an axis. Input range 0 to
360.0000
Start angle A axis Q411 (absolute): Starting angle in
the A axis at which the first measurement is to be
made. Input range -359.999 to 359.999
End angle A axis Q412 (absolute): Ending angle in
the A axis at which the last measurement is to be
made. Input range -359.999 to 359.999
Angle of incid. A axis Q413: Angle of incidence in
the A axis at which the other rotary axes are to be
measured. Input range -359.999 to 359.999
Number meas. points A axis Q414: Number of
probe measurements with which the TNC is to
measure the A axis. If the input value = 0, the TNC
does not measure the respective axis. Input range 0
to 12
Start angle B axis Q415 (absolute): Starting angle in
the B axis at which the first measurement is to be
made. Input range -359.999 to 359.999
End angle B axis Q416 (absolute): Ending angle in
the B axis at which the last measurement is to be
made. Input range -359.999 to 359.999
Angle of incid. in B axis Q417: Angle of incidence
in the B axis at which the other rotary axes are to be
measured. Input range -359.999 to 359.999
Number meas. points B axis Q418: Number of
probe measurements with which the TNC is to
measure the B axis. If the input value = 0, the TNC
does not measure the respective axis. Input range 0
to 12
Start angle C axis Q419 (absolute): Starting angle in
the C axis at which the first measurement is to be
made. Input range -359.999 to 359.999
End angle C axis Q420 (absolute): Ending angle in
the C axis at which the last measurement is to be
made. Input range -359.999 to 359.999
Angle of incid. in C axis Q421: Angle of incidence
in the C axis at which the other rotary axes are to be
measured. Input range -359.999 to 359.999
Number meas. points C axis Q422: Number of
probe measurements with which the TNC is to
measure the C axis. Input range 0 to 12. If the input
value = 0, the TNC does not measure the respective
axis.