HEIDENHAIN TNC 640 (34059x-05) Cycle programming - Manual (Page 126)

Fixed Cycles: Tapping / Thread Milling
4.8 THREAD DRILLING/MILLING (Cycle 264, DIN/ISO: G264)
4
126
TNC 640 | User's Manual Cycle Programming | 1/2015
Cycle parameters
Nominal diameter Q335: Nominal thread diameter.
Input range 0 to 99999.9999
Thread pitch Q239: Pitch of the thread. The
algebraic sign differentiates between right-hand and
left-hand threads:
+ = right-hand thread
– = left-hand thread
Input range -99.9999 to 99.9999
Thread depth Q201 (incremental): Distance
between workpiece surface and root of thread.
Input range -99999.9999 to 99999.9999
Total hole depth Q356 (incremental): Distance
between workpiece surface and bottom of hole.
Input range -99999.9999 to 99999.9999
Feed rate for pre-positioning Q253: Traversing
speed of the tool when moving in and out of the
workpiece, in mm/min. Input range 0 to 99999.9999
alternatively
FMAX, FAUTO
Climb or up-cut Q351: Type of milling operation
with M3
+1 = Climb
–1 = Up-cut (If you enter 0, climb milling is used for
machining)
Plunging depth Q202 (incremental): Infeed per cut.
The depth does not have to be a multiple of the
plunging depth. Input range 0 to 99999.9999
The TNC will go to depth in one movement if:
the plunging depth is equal to the depth
the plunging depth is greater than the depth
NC blocks
25 CYCL DEF 264 THREAD DRILLNG/
MLLNG
Q335=10
;NOMINAL DIAMETER