HEIDENHAIN TNC 640 (34059x-05) Cycle programming - Manual (Page 263)

MIRRORING (Cycle 8, DIN/ISO: G28) 10.5
10
TNC 640 | User's Manual Cycle Programming | 1/2015
263
Please note while programming
When using Cycle 8 in a tilted system please
remember:
First program the tilting movement and then call
Cycle 8 MIRRORING!
If you call Cycle 8 before you have tilted the working
plane, the TNC will output an error message.
Cycle parameters
Mirrored axis?: Enter the axis to be mirrored. You
can mirror all axes except for the spindle axis—
including rotary axes—with the exception of the
spindle axis and its associated auxiliary axis. You can
enter up to three axes. Input range: Up to three NC
axes
X, Y, Z, U, V, W, A, B, C
NC blocks
79 CYCL DEF 8.0 MIRROR IMAGE
80 CYCL DEF 8.1 X Y Z