HEIDENHAIN TNC 640 (34059x-05) Cycle programming User Manual
Page 544
Touch Probe Cycles: Automatic Workpiece Inspection
16.8 MEASURE RECTANGLE OUTSIDE (Cycle 424, DIN/ISO: G424)
16
544
TNC 640 | User's Manual Cycle Programming | 1/2015
Tolerance for center 1st axis Q279: Permissible
position deviation in the reference axis of the
working plane. Input range 0 to 99999.9999
Tolerance for center 2nd axis Q280: Permissible
position deviation in the minor axis of the working
plane. Input range 0 to 99999.9999
Measuring log Q281: Define whether the TNC
should create a measuring log:
0
: Do not create a measuring log
1
: Create a measuring log: The TNC saves the
log
file TCHPR424.TXT
as standard in the directory
TNC:\.
2
: Interrupt program run and output measuring log
to the TNC screen. Resume program run with NC
Start.
PGM stop if tolerance error Q309: Definition of
whether in the event of a violation of tolerance
limits the TNC is to interrupt program run and output
an error message:
0
: Do not interrupt program run, do not output an
error message
1
: Interrupt program run and output an error
message
Tool for monitoring Q330: Definition of whether
the TNC is to monitor the tool (see "Tool
monitoring", page 526). Input range 0 to 32767.9,
alternatively tool name with maximum of 16
characters
0
: Monitoring inactive
> 0
: Tool number in the tool table TOOL.T
Q279=0.1
;TOLERANCE 1ST
CENTER
Q280=0.1
;TOLERANCE 2ND
CENTER
Q281=1
;MEASURING LOG
Q309=0
;PGM STOP IF ERROR
Q330=0
;TOOL