HEIDENHAIN TNC 640 (34059x-05) Cycle programming - Manual (Page 423)

CONTOUR-PARALLEL THREAD
(Cycle 830, DIN/ISO: G830)
12.30
12
TNC 640 | User's Manual Cycle Programming | 1/2015
423
Cycle parameters
Thread position Q471: Define the position of the
thread:
0 : External thread
1 : Internal thread
Thread orientationQ461: Define the direction of
the thread pitch:
0 : Longitudinal (parallel to the rotary axis)
1 : Lateral (perpendicular to the rotary axis)
Set-up clearance Q460: Set-up clearance
perpendicular to thread pitch.
Thread pitch Q472: Pitch of the thread.
Depth of thread Q473 (incremental): Depth of the
thread. If you enter 0, the depth is assumed for a
metric thread based on the pitch.
Runout of thread Q474 (incremental): Length of the
path on which, at the end of the thread, the tool is
lifted from the current plunging depth to the thread
diameter Q460.
Q460
Q472
Q473