HEIDENHAIN TNC 640 (34059x-05) Cycle programming - Manual (Page 420)

Cycles: Turning
12.29 THREAD EXTENDED (Cycle 832, DIN/ISO: G832)
12
420
TNC 640 | User's Manual Cycle Programming | 1/2015
Angle of infeed Q467: Angle for the infeed Q463.
The reference angle is formed by the parallel line to
the thread pitch.
Type of infeed Q468: Define the type of infeed:
0 : Constant chip cross section (infeed lessens with
depth)
1 : Constant plunging depth
Starting angle Q470: Angle of the turning spindle at
which the thread start is to be made.
Number of starts Q475: Number of thread starts
Number of air cuts Q476: Number of air cuts
without infeed at finished thread depth