HEIDENHAIN TNC 640 (34059x-05) Cycle programming - Manual (Page 254)

Cycles: Coordinate Transformations
10.1 Fundamentals
10
254
TNC 640 | User's Manual Cycle Programming | 1/2015
10.1 Fundamentals
Overview
Once a contour has been programmed, you can position it on the
workpiece at various locations and in different sizes through the
use of coordinate transformations. The TNC provides the following
coordinate transformation cycles:
Cycle Soft key Page
7 DATUM
For shifting contours directly within
the program or from datum tables 255
247 DATUM SETTING
Datum setting during program run 261
8 MIRRORING
Mirroring contours 262
10 ROTATION
Rotating contours in the working
plane 264
11 SCALING FACTOR
Increasing or reducing the size of
contours
266
26 AXIS-SPECIFIC SCALING
Increasing or reducing the size of
contours with axis-specific scaling
267
19 WORKING PLANE Machining
in tilted coordinate system on
machines with swivel heads and/or
rotary tables 269
Effect of coordinate transformations
Beginning of effect: A coordinate transformation becomes effective
as soon as it is defined—it is not called separately. It remains in
effect until it is changed or canceled.
To cancel coordinate transformations:
Define cycles for basic behavior with a new value, such as
scaling factor 1.0
Execute a miscellaneous function M2, M30, or an END PGM
block (depending on machine parameter
clearMode).
Select a new program