Grass Valley UIM v.2.1.1 - Manual (Page 89)

February 5, 2008 UIM Instruction Manual 89
Example master hosts file entries for the UIM-SAN-FCIP
Example master hosts file entries for the UIM-SAN-FCIP
The following master host file was created for the example Open SAN system shown
on
page 83 . This host file can be used for both non-redundant and redundant network
scenarios since teamed network adapters share the same IP address. You can use the
following example as a model for creating your own host file. Note that XP5_fco is
on the same subnet as the aliased SAN interfaces (230).
192.168.100.151 SAN1_XP1
192.168.100.152 SAN1_XP2
192.168.100.153 SAN1_XP3
192.168.100.154 SAN1_XP4
192.168.100.155 SAN1_FSM1
192.168.100.156 SAN1_FSM2
192.168.100.157 SAN1_UIM1 SAN1_XP1_UIMFC SAN1_XP2_UIMFC
192.168.100.158 SAN1_UIM2 SAN1_XP3_UIMFC SAN1_XP4_UIMFC
192.168.230.157 SAN1_UIM1_fc0 SAN1_XP1_fc0 SAN1_XP2_fc0
192.168.230.158 SAN1_UIM2_fc0 SAN1_XP3_fc0 SAN1_XP4_fc0
192.168.100.105 XP5
192.168.230.105 XP5_fc0
Example master hosts file entries for two SANs
The following master host file was created for the example system shown on page 90 .
This host file can be used for both non-redundant and redundant network scenarios
since teamed network adapters share the same IP address.
192.168.100.151 SAN1_XP1
192.168.100.152 SAN1_XP2
192.168.100.155 SAN1_FSM1
192.168.100.156 SAN1_FSM2
192.168.100.051 SAN2_XP1
192.168.100.052 SAN2_XP2
192.168.100.055 SAN2_FSM1
192.168.100.056 SAN2_FSM2
192.168.100.157 SAN1_UIM1 SAN1_XP1_UIMFC SAN1_XP2_UIMFC
192.168.100.057 SAN2_UIM1 SAN2_XP1_UIMFC SAN2_XP2_UIMFC
192.168.230.157 SAN1_UIM1_fc0 SAN1_XP1_fc0 SAN1_XP2_fc0
192.168.230.057 SAN2_UIM1_fc0 SAN2_XP1_fc0 SAN2_XP2_fc0
192.168.100.105 XP5
192.168.230.105 XP5_fc0
Entries
100BT
UIM-
SAN-
FCIP
Entries
Stand-
alone
Profile XP
System
Stand-
alone
Profile XP
System
UIM-
SAN-
FCIP
Entries