beautypg.com

Grass Valley UIM v.2.1.1 User Manual

Page 4

background image

4

UIM Instruction Manual

February 5, 2008

Contents

Connect network cables – Dell 1950....................................................................... 43
Configure UIM-DIS-GEIP hostname and IP addresses .......................................... 44
Configure Profile host names & IP addresses ........................................................ 46
Test the UIM-DIS-GEIP........................................................................................... 46
Create UIM-DIS-GEIP system disk image .............................................................. 46
Solving common setup problems ............................................................................ 46

Check the hosts file on each system .................................................................. 46
Testing Ethernet connectivity and name resolution............................................ 47
Test Fibre Channel network name resolution..................................................... 47
Check Profile (PDR Family) Fibre Channel network settings ............................. 47
Check Profile XP (PVS) Fibre Channel network settings ................................... 48

Chapter 4

UIM-SAN-GEIP Installation:
Grass Valley Open SAN System

Onsite planning ....................................................................................................... 50

Specify host names in the Open SAN ................................................................ 50
Specify a subnet address for the 1000BT streaming LAN ................................. 51
Specify redundant FC SCSI switch fabric topology ............................................ 52

Rack-mount the UIM ............................................................................................... 52
Converting the UIM-DIS-GEIP to a UIM-SAN-GEIP ............................................... 53

Uninstall the Fibre Channel adapter IP driver .................................................... 53
Install UIM-SAN-GEIP System Software for Open SAN..................................... 54

Modify the master hosts file .................................................................................... 56

About UIM-SAN-GEIP host name aliasing ......................................................... 56
About load balancing when multiple UIM-SAN-GEIPs are used ........................ 57
Example master hosts file entries for the UIM-SAN-GEIP ................................. 58
Example master hosts file entries for two SANs ................................................ 58

Configure the UIM network settings ........................................................................ 61
Connect UIM-SAN-GEIP network cables

Dell 2650 ............................................................................................................ 64

Connect UIM-SAN-GEIP network cables

Dell 2850 ............................................................................................................ 65

Connect UIM-SAN-GEIP network cables

Dell 1950 ............................................................................................................ 66

Install CVFS client software on the UIM-SAN-GEIP ............................................... 67

Install CVFS client software on the UIM ............................................................. 67
License the UIM-SAN-GEIP CVFS Client Software ........................................... 71
Configure CVFS Client software on the UIM-SAN-GEIP.................................... 73

Perform miscellaneous system settings .................................................................. 76
Enable Fibre Channel network TCP checksums..................................................... 78
Verify access to shared storage .............................................................................. 78

The UIM-SAN-GEIP does not recognize shared storage ................................... 78

Test the UIM-SAN-GEIP functionality ..................................................................... 79
Create UIM-SAN-GEIP system disk image ............................................................. 79

Chapter 5

UIM-SAN-FCIP Installation:
Grass Valley Open SAN System

Onsite planning ....................................................................................................... 82

Specify host names in the Open SAN ................................................................ 82
Specify a subnet address for the FC IP streaming network ............................... 83
Specify redundant FC SCSI switch fabric topology ............................................ 84

Rack-mount the UIM ............................................................................................... 84

Install UIM-SAN-FCIP System Software for Open SAN ..................................... 85

Modify the master hosts file .................................................................................... 87

About UIM-SAN-FCIP host name aliasing ......................................................... 87
About load balancing when multiple UIM-SAN-FCIPs are used......................... 88

This manual is related to the following products: