Grass Valley UIM v.2.1.1 - Manual (Page 83)

February 5, 2008 UIM Instruction Manual 83
Specify a subnet address for the FC IP streaming network
NOTE: Host names are limited to 15 characters. Also, host names are not case
sensitive.
Specify a subnet address for the FC IP streaming network
You must specify a unique subnet address for the FC IP network used for streaming
media. Do not use the same subnet address as the control LAN. Check with your local
network administrator to obtain a valid subnet address.
The following diagram illustrates the subnet address requirements.
SAN1_XP1
SAN1_XP2
SAN1_FSM2
SAN1_FSM1
SAN1_XP3
SAN1_XP4
SAN1_UIM2
Fibre Channel Switch Fabric (SCSI)
SAN1_UIM1
10/100BT Ethernet LAN (Control) x.x.100.x
Shared Storage
Profile Open SAN Shared Storage
FC IP Network (Streaming) x.x.230.x
[1]
[1]
[1]
[2] [2]
0BT Ethernet LAN x.x.100.x (Control)
Fibre
C
. m
Profile XP
Platform
(Standalone)
XP5
Channel
x.x.230.x
Notes:
[1] Optional redundant Ethernet
fabrics, and Fibre Channel switch
fabrics are not shown.
[2] The number of UIM-SAN-FCIPs is
determined by the number of
simultaneous streams and the
performance required.