Grass Valley UIM v.2.1.1 - Manual (Page 43)

February 5, 2008 UIM Instruction Manual 43
Connect network cables – Dell 1950
Connect network cables – Dell 1950
Connect the network cables for each Profile XP Media Platform and Dell 1950-based
UIM-DIS-GEIP as shown.
*NOTE: Redundant Ethernet Operation
1. Ensure that the primary and redundant ports are connected to different switches.
2. Verify that the Ethernet switches support Spanning Tree Protocol (STP), and that the protocol is configured as described
in
“Redundant Ethernet network requirements” on page 17 .
100BT Ethernet
(Do not use when
dual-port Ethernet
option is installed.)
Fibre Channel Connection
(Point to point, or Fibre Channel Switch fabric)
Dual-port Ethernet (opt.)
Port A*
(Primary)
Port B*
(Redundant)
Slot location
may vary.
*See note.
D C
A B
Profile XP Media Platform
Control Team
Ports A/B
(Control LAN)
Streaming Teaming
Ports C/D
(Streaming LAN)