Grass Valley UIM v.2.1.1 - Manual (Page 134)

134 UIM Instruction Manual February 5, 2008
Chapter 6 Service Information
2. When prompted, enter the Windows operating system software license number
shipped with your UIM.
3. Click Next .
4. When prompted, type the Computer Name and the Administrative password.
Computer name: Enter the UIM host name chosen for your system.
Default administrator password: triton
5. Click OK , then Next to continue.
The system will finish setup, and then restart.
6. When the system restarts, login to the administrator account. Use triton for the
password.
7. Proceed to “Part 4: Modifying Windows operating system settings” .
Part 4: Modifying Windows operating system settings
Use this procedure to configure the Windows operating system to factory
specifications.
1. Rename My Computer icon.
a. Right-click the My Computer icon, then select Rename .
b. Type the host name used for this UIM.
2. Modify Virtual Memory setting using the following:
a. Right-click the My Computer icon, then select Properties .
b. In the System Properties window, select the Advanced tab.
c. Click the Performance Options or Settings .
d. On the Advanced tab, click the Change button in the Virtual Memory section of
the Performance Options dialog box.
e. Set the Initial size (MB) entry to 1024 (1024MB)
f. Set the Maximum size (MB) entry to 1024 .
g. Click the Set .
h. Click OK in the Virtual Memory window.
i. Click OK in the restart notification dialog box.
j. Click OK in the Performance Options window.
3. Click OK in the System Properties dialog box.
4. When prompted to restart, select Yes .
The UIM reboots automatically.
5. Verify that the UIM reboots initializes fully, passing all startup tests without errors.