Grass Valley UIM v.2.1.1 - Manual (Page 140)

140 UIM Instruction Manual February 5, 2008
Chapter 6 Service Information
6. Enter subnet mask.
7. Click OK to close the Internet Protocol (TCP/IP) Properties window.
8. Click OK to close the Control Team Properties window.
9. Click Close to close the Control Team Status Window
10. The Control Team icon should be displayed in the Windows taskbar if there is a
network connection.
Part 9: Set the Streaming Team IP Address
1. Double-click the Streaming Team entry to display its Properties Window
2. Click the “Show icon in taskbar when connected” option, then ensure the
checkmark is present.
3. Select the Internet Protocol (TCP/IP) component from the components list, and
click the Properties button.
4. Click the “Use the following IP address” option.
5. Enter the Streaming Team IP address in the IP address field.
6. Enter the subnet mask.
7. Click OK to close the Internet Protocol (TCP/IP) Properties window.
8. Click OK to close the Streaming Team Properties window.
9. Click Close to close the Streaming Team Status Window.
10. The Streaming Team icon should be displayed in the Windows taskbar if connected
to the network.
Part 10: Rename the Qlogic FC NIC
1. In the Network and Dial-Up Connections window identify the local area
connection that is assigned to the Qlogic QLA2X00 PCI Adapter (Should be Local
Area Connection 5).
2. In the Network and Dial-Up Connections window, right-click this connection, then
select Rename and rename this connection: QLogic FC NIC.
Part 11: Set the Qlogic FC NIC IP Address
1. Double-click the Qlogic FC NIC entry to display its Status Window.
2. In the Qlogic FC NIC Status Window click Properties .
3. Click the “Show icon in taskbar when connected” option, then ensure the
checkmark is present.
4. Select the Internet Protocol (TCP/IP) component from the components list, and
click the Properties button.
5. Click the “Use the following IP address” option.
6. Enter the IP address for the Fibre Channel interface in the IP address field.
7. Enter the subnet mask.