Grass Valley UIM v.2.1.1 - Manual (Page 41)

February 5, 2008 UIM Instruction Manual 41
Connect network cables – Dell 2650
Connect network cables – Dell 2650
Connect the network cables for each Profile XP Media Platform and UIM-DIS-GEIP
as shown.
Profile XP Media Platform
100BT Ethernet
(Do not use when
dual-port Ethernet
option is installed.) Fibre Channel
Connection
(Point to point, or
Fibre Channel
Switch fabric)
IP UIM
Control Team
Intel Ports A/B
(Control LAN)
Dual-port Ethernet (opt.)
Port A*
(Primary)
Port B*
(Redundant)
Slot location
may vary.
*See note.
Integrated
1000BT
Ports
(Not Used)
Streaming Teaming
Intel Ports C/D
(Streaming LAN)
*NOTE: Redundant Ethernet Operation
1. Ensure that the primary and redundant ports are connected to different
switches.
2. Verify that the Ethernet switches support Spanning Tree Protocol
(STP), and that the protocol is configured as described in
“Redundant
Ethernet network requirements” on page 17 .