Enable fibre channel network tcp checksums – Grass Valley UIM v.2.1.1 User Manual
Page 33

February 5, 2008
UIM Instruction Manual
33
Enable Fibre Channel network TCP checksums
Enable Fibre Channel network TCP checksums
When configuring Profile XP Media Platform or Profile PDR Series Video Servers,
you must enable TCP checksums on the Fibre Channel Network adapter. For
instructions, refer to the Fibre Channel Networking chapter in the Profile XP Media
Platform System Guide or Profile Family User Manual.
SAN1_XP1
SAN1_XP2
SAN1_FSM2
SAN1_FSM1
SAN1_XP3
SAN1_XP4
SAN1_UIM2
Fibre Channel Switch Fabric (SCSI)
SAN1_UIM1
10/100BT Ethernet LAN (Control)
Shared Storage
Profile Open SAN Shared Storage
Fibre Channel IP Network (Streaming)
This manual is related to the following products: