Grass Valley UIM v.2.1.1 - Manual (Page 30)

30 UIM Instruction Manual February 5, 2008
Chapter 2 Product Description
Rear panel view, Dell 1950, 1000 BaseT
Rear panel view, Dell 1950, Fibre Channel IP
Software configurations available
There are three UIM configurations which share a common platform, but vary in the
installed cards and software:
• UIM-DIS-GEIP — configured for operation with standalone Profile storage
• UIM-SAN-GEIP — configured for integration into a Grass Valley Open SAN
shared storage system and provides Gigabit Ethernet streaming
• UIM-SAN-FCIP — configured for integration into a Grass Valley Open SAN
shared storage system and provides Fibre Channel IP streaming
A UIM-SAN-GEIP is built as a UIM-SAN-GEIP, but requires additional software
installs and setup for integration in a Grass Valley Open SAN system. This is done
onsite or at the factory where the Open SAN shared storage system is assembled.
A UIM-SAN-FCIP is similar to a UIM-SAN-GEIP, with a extra Fibre Channel port
added, and the streaming Gigabit Ethernet ports removed.
The following sections describe each UIM product in more detail.
Streaming Team Ports
(Streaming LAN)
UIM
A & B Control Team Ports
(Control LAN)
C & D Fibre Channel Port
UIM
A & B Control Team Ports
(Control LAN)
Fibre Channel Ports IP & SCSI