Gasboy 1000 Series Technical Reference Manual - Manual (Page 96)

GASBOY Series 1000
4-4 03/07/03
11. The LCD displays: PUMP #x IS READY and you may proceed to dispense
fuel.
12. When you finish fueling your vehicle, turn off the dispenser handle and return
the nozzle to its holder. The transaction information is automatically
recorded in the system’s memory for later recall. The transaction information
may also be printed on the data terminal or logger.
Transaction information includes transaction number, key 1 number, key 2
number, ID fields, date, time, pump number, product type, quantity
dispensed, unit price and/or total price (if configured), odometer/hours
reading, miles and MPG/HPG (if enabled), and transaction message.
13. If you have the receipt printer option and wish to have a receipt, insert your
key(s) into the receptacle(s) and turn clockwise. The LCD displays:
RECEIPT? 1=YES 0=NO.
To print a transaction receipt, press 1 and ENTER. The LCD displays:
RECEIPT IS PRINTING. If you have requested multiple receipts, they print
out one after the other. The system goes to idle. For more on receipt
printing, see the FleetKey Operation Manual.
14. If you have transaction MPG/HPG enabled and wish to view your
MPG/HPG, insert your key(s) into the receptacle(s) and turn clockwise. The
LCD displays: MPG? 1=YES 0=NO or HPG? 1=YES 0=NO.
To display your vehicle’s MPG (or HPG), press 1 and ENTER. The LCD
displays MPG xxx.x or HPG xxx.x. The system goes to idle. For more on
transaction MPG/HPG, see the FleetKey Operation Manual.