Gasboy 1000 Series Technical Reference Manual - Manual (Page 51)

Card Systems
03/07/03 2-33
Transaction receipts are not available if:
•
There are no available receipt transactions in the system memory for the card
or vehicle number.
•
The receipt printer is in an error condition. (i.e., printer jammed, paper out,
printer down).
The system operator can issue a receipt printer command, GR, from the data
terminal to obtain a receipt for a specific transaction number.
Supervisor Card
Standard This option allows the system operator to use a specially encoded supervisor card
to manually enter card information at the Series 1000 keypad. Supervisor cards
are typically used when a card has been lost.
Mag Card
Systems
A supervisor card can be encoded with special characters (A or E) that designate
which fields (Card Number, ID Field 1, or ID Field 2) should be entered
manually. The fields to be manually entered must be filled with either all As or all
Es.
For example, assume that your system has the following card layout:
ÂÂB–ÂUaUVAI–ÂÂB–Â97T@–ÂBEAH@!–ÂBEAH@"–ÂÂB–ÂA`R–ÂRTQ@–ÂRTQ@–Â9DA9GÂ
ÂÂU–ÂÂÂE@–ÂÂU–ÂPQ–ÂAIR–ÂXAD–ÂÂU–Â@7VA–ÂHEI–Â7WVD–Â@ECEVÂ
–ÂÂ````––Â````–ÂÂ````–ÂÂ````––ÂaaII–ÂÂÂ`–ÂÂÂ`–ÂÂÂ`ÂÂÂ
X = digit (0-9), FS = field separator