Gasboy 1000 Series Technical Reference Manual - Manual (Page 75)

Cardless Systems
03/07/03 3-9
Product Authorization
Description The product authorization feature controls access to fuel type(s). Using the LF
command, the system operator can load up to nine authorization codes (1-9) with
up to nine fuel types per code. The user is permitted to access only the fuel
type(s) loaded into the system for the authorization code contained within his
vehicle file record. The authorization code 0 permits access to all fuels. Figure 3-
5 shows a product authorization code table initiated by the PF command.
RBÂ
7WVDÂÂ9Q@A0ÂÂ!ÂÂ7HHQYUÂBWAHU !ÂÂ "ÂÂ #ÂÂ $ÂÂ %Â
7WVDÂÂ9Q@A0ÂÂ"ÂÂ7HHQYUÂBWAHU !Â
7WVDÂÂ9Q@A0ÂÂ#ÂÂ7HHQYUÂBWAHU "Â
7WVDÂÂ9Q@A0ÂÂ$ÂÂ7HHQYUÂBWAHU #Â
7WVDÂÂ9Q@A0ÂÂ%ÂÂ7HHQYUÂBWAHU $Â
7WVDÂÂ9Q@A0ÂÂ&ÂÂ7HHQYUÂBWAHU %Â
7WVDÂÂ9Q@A0ÂÂ'ÂÂ7HHQYUÂBWAHU "ÂÂ #Â
7WVDÂÂ9Q@A0ÂÂ(ÂÂ7HHQYUÂBWAHU #ÂÂ $ÂÂ %Â
7WVDÂÂ9Q@A0ÂÂ)ÂÂ7HHQYUÂBWAHU $ÂÂ %ÂÂ
Â
Figure 3-5. Product Authorization Codes
Product Limitation
Description The product limitation feature controls the amount of product that can be
dispensed in one transaction. The limit is specified by the limitation code
contained within the user’s vehicle file record. Using the LL command, the
system operator can load the 10 available limitation codes (0-9) with any quantity
from 1 to 99999. If a user reaches the maximum limit that has been entered for
the code in his file, then the pump is automatically turned off causing a LIMIT
CUTOFF error message. Figure 3-6 shows a product limitation code table
initiated by the PL command.
RHÂ
Â
HEIEVU0Â
Â
Â3ÂÂÂÂÂ%Â
!Â3ÂÂÂÂ! Â
"Â3ÂÂÂÂ!%Â
#Â3ÂÂÂÂ" Â
$Â3ÂÂÂÂ"%Â
%Â3ÂÂÂÂ# Â
&Â3ÂÂÂÂ#%Â
'Â3ÂÂÂÂ$ Â
(Â3ÂÂÂ) Â
)Â3Â)))))Â
Â
Figure 3-6. Product Limitation Codes