Gasboy 1000 Series Technical Reference Manual - Manual (Page 124)

GASBOY Series 1000
4-32 03/07/03
3. Figure out the number of RAM bytes used. Add the calculation totals of each option selected
and write the sum in the space provided at the bottom. This is your RAM Total.
OPTIONS
CALCULATIONS
Subtotal of ID field bytes * _____ x 10 =
Receipt Printer + 962 =
w/multiple receipts + 1 =
Manual entry
+
(manual entry field bytes X 10)
=
Manual entry lockout
+
1259
=
AP w/Data Entries
+
(trans bytes
-
2)
=
w/off-site fueling - (trans bytes + 2) =
MPG History (Number of Records _____ x (Field Bytes ** _____ + 13)) + 47 =
w/AP entries + 5 =
w/off-site fueling + 4 =
Fuel Allocation(Number of Totalizers _____ x 4) + (2 x allocation field bytes ____) + 42 =
w/AP entries + 3 =
Additional blocks of lockout (# of additional blocks _____
x
1250)
=
Maintenance
+
327
=
Encoding
+
7
=
w/supervisor keys + 3 =
Off-site fueling + (trans bytes + 4) =
Loadable Base Pump + 4 =
Multi-Level Password + 68 =
w/allocation + 12 =
w/MPG history
+
8
=
w/maintenance
+
5
=
Supervisor keys
+
6
=
Delivery & Dipstick + 6 =
Tank Monitor Interface + 506 =
Extended Timeouts + 58 =
Pump Switch Timer + 11 =
Fuel Point + (trans bytes x 9) + 689 =
w/allocation + 3 =
w/pump switch timer
+
8
=
w/MPG history
+
1
=
w/receipt
+
1
=
RAM Total =
* You calculated the subtotal of ID field bytes in Step 1.
** You calculated field bytes for each of your ID fields in Step 1. Use the value for the ID
field you are using for your MPG history (usually VEH).
4. Figure out the amount of available transaction space.
Write the following values: ROM TOTAL (From Step 2):
RAM TOTAL (From Step 3):