Gasboy 1000 Series Technical Reference Manual - Manual (Page 41)

Card Systems
03/07/03 2-23
The system operator still may access the other software features and may
activate a pump for one transaction through the Activate Pump feature. The
automatic site shutdown can be disabled through the data terminal.
Odometer/Hours Entry
Description This feature uses the manual entry check digit encoded on the card to determine
whether the user is prompted to enter an odometer/hours reading at the Series
1000 keypad.
"A" System For matching "A" Systems, odometer may be omitted entirely or ordered as
mandatory, rather than regulated by a check digit.
Expiration Date on Cards (Mag Card Only)
The Series 1000 mag card system provides for an expiration date (year and
month) to be encoded on each card. When the expiration date is reached, the
card is not honored by the system. This feature can be disabled through the data
terminal.
Dual Port
This feature allows the system to be connected to two terminal devices or a
terminal and a modem. The system can communicate through only one port at a
time.
Help Feature
The Help feature provides a list of all terminal commands. If the operator wishes
further explanation, an expanded help command produces a list showing each
command, followed by a brief description.
System Message Display
The system operator can load, via the data terminal, a 20-character message to
appear on the Series 1000 Liquid Crystal Display (LCD). When the Series 1000
is not in use, the LCD alternates between the system message and the ENTER
CARD prompt message.
Encoded Card Information Display
While in diagnostic mode, the system operator can display, on the Series 1000
LCD display, the encoded digits for the card currently inserted in the reader. The
encoded information appears four digits at a time. The system operator can also
print, on the data terminal, the card information of the last card used in the
system.