Gasboy 1000 Series Technical Reference Manual User Manual
Page 21
Card Systems
03/07/03
2-3
9.
If you are required to enter a Personal Identification Number (PIN), the LCD
displays: ENTER P.I.N.
Using the keypad, enter your PIN number and press ENTER. To ensure
security, an asterisk (*) appears for each digit you press. If you make a
mistake while entering your PIN, press CLEAR and enter it again.
You have three tries to enter the correct PIN. After the third unsuccessful
try, the display returns to ENTER CARD and you must start again at Step 2.
If your system uses the Auto Pin Lockout feature, the card is automatically
locked out (invalidated) after the third unsuccessful PIN entry.
10. If you are required to enter an odometer or hours reading, the LCD displays:
ENTER ODOMETER or ENTER HOURS.
Use the keypad to enter the mileage/time that appears on your vehicle’s
odometer or hour meter (up to six digits, no tenths). The digits appear as
they are entered. If you make a mistake, press CLEAR and enter the
reading again. When you enter the correct reading, press ENTER. The
LCD prompts: SELECT PUMP
11. Enter the desired pump number and press ENTER.
If the pump is available and you are authorized to use it, the LCD displays:
PUMP #x IS READY and you may proceed to dispense fuel.
If
PUMP #x IS READY is not displayed, one of the following messages
appears:
NO SUCH PUMP
PUMP IN USE!
PUMP
DISABLED
INVALID
FUEL
You have three tries to select a correct pump. If, after three attempts, the
system does not display PUMP #x IS READY, the display returns to ENTER
CARD and you must begin again at Step 2.
12. When you finish fueling your vehicle, turn off the fuel dispenser handle and
return the nozzle to its holder. The transaction information is automatically
recorded in the system’s memory for later recall. If you are using the Direct
Printout feature, the transaction information is also printed on the data
terminal or logger.
Transaction information includes transaction number, card number, ID Field
1, ID Field 2, date, time, pump number, product type, quantity dispensed,
odometer/hours reading, and transaction message.
13. If you have the receipt printer option and you wish to have a receipt, insert
and remove your card. The LCD displays: RECEIPT? 1=YES 0=NO.
To print a transaction receipt, press 1 and ENTER. The LCD displays:
RECEIPT IS PRINTING. Multiple receipts print out one after the other. The
system goes to idle.