Gasboy 1000 Series Technical Reference Manual - Manual (Page 69)

Cardless Systems
03/07/03 3-3
If the number entered is valid, the system proceeds to the next step
otherwise, an error message displays on the LCD and the system returns to
its idle state.
6. If you are required to enter a Personal Identification Number (PIN), the LCD
displays: ENTER PIN.
Using the keypad, enter your PIN number and press ENTER. To ensure
security, an asterisk (
* ) appears for each digit you press. If you make a
mistake while entering your PIN, press CLEAR and enter it again.
You have three tries to enter your PIN. After the third unsuccessful try, the
display returns to ENTER VEHICLE and you must start again at Step 2.
After a successful PIN entry the LCD displays: SELECT PUMP
7. Enter the desired pump and press ENTER. If the pump is available and you
are authorized to use it, the LCD displays: PUMP #x IS READY and you may
proceed to dispense fuel.
If
the PUMP #x IS READY is not displayed, one of the following messages
appears:
NO SUCH PUMP
PUMP IN USE!
PUMP DISABLED
INVALID FUEL
You have three tries to select a correct pump. If, after three attempts, the
system does not display PUMP #x IS READY, the display returns to ENTER
VEHICLE and you must begin again at Step 2.
8. When you finish fueling your vehicle, turn off the fuel dispenser handle and
return the nozzle to its holder. The transaction information is automatically
recorded in the system’s memory for later recall. The transaction information
may also be printed on the data terminal or logger.
Transaction
information includes transaction number, vehicle number,
account field 2 (EMP), date, time, pump number, product type, quantity
dispensed, unit price and/or total price (if configured), odometer reading, and
transaction message.