Epiphan Networked VGA Grid - Manual (Page 72)

Networked VGA Grid User Guide 1-5 Configure Date and Time
The date and time configuration page also indicates whether the system is currently using synchronized or
manually set time, and whether or not a local network time protocol (ntp) server is running.
The following table describes the date and time configuration fields.
Table 16 Date and Time Options
Label Description/Options
Time Zone The currently selected time zone.
Enable time
synchronization
Whether or not a time synchronization protocol is being used for setting time. (If not
selected, time is set manually.)
Protocol The time synchronization protocol.
Service IP Address The time synchronization server address.
Set time manually Whether or not time is set manually. (If time is not being set manually, a time
synchronization protocol is used.)
Date The current date. (This is the current date even if the radio button Set time manually is
not selected.)
Time The current time. (This is the current time even if the radio button Set time manually is
not selected.)
Change the Time Zone
By default the system has the Canada/Eastern time zone set. Configuration of the time zone is necessary to
ensure synchronized time servers provide the correct time to the system.
To select another time zone:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the Admin
Interface .
60