Epiphan Networked VGA Grid - Manual (Page 46)

Networked VGA Grid User Guide 1-3 Configure Network Settings
Table 7 Network Information Fields
Label Description/Options
MAC Address A media access control address (MAC address) is a unique identifier for the
network interface. The value is read-only and cannot be changed. You may need
to share this value with your system administrator.
Current IP Address Reflects the current internet protocol address (IP address) of the system. This
value is either obtained from the DHCP server (if using DHCP) or is the configured
static IP address. The Networked VGA Grid supports IPv4 addresses. It does not
support IPv6 addresses.
Configure a Static IP Address
Your network administrator may require you to use a static IP address for your Networked VGA Grid.
To configure a static IP address:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the Admin
Interface .
2. Login as admin.
3. Select the Network link in the Configuration menu; the network configuration page opens.
4. Select the radio button use static address, if not already selected.
5. Enter the desired IP Address and Network Mask.
Only IPv4 addresses are supported.
34